Product ID:ENAMEL SEMI GLOSS RUST INHIBITING 24084 OD
MSDS Date:05/12/1989
FSC:8010
NIIN:00-290-6648
MSDS Number: BHDJM

CON-LUX COATINGS, INC.

226 TALMAGDE ROAD
EDISON, NJ 08818-0847
US

Emergency Phone: (206) 287-4000

Info Phone: (206) 287-4000

Cage: 60189

CON-LUX COATINGS INC

847 EDISON, NJ 08818-0847 US

Telephone: 732-287-4000

Cage: 60189

STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: >1%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: >1%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192

ZINC OXIDE

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 4%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293

LEAD ORTHO-PLUMBATE

CAS: 1314-41-6

Fraction By Weight: >1%

OSHA PEL 0.2 MG/M3

LEAD CHROMATE

CAS: 1344-37-2

Fraction By Weight: 15%

OSHA PEL 0.05 MG/M3 (PB)

ACGIH TLV: 0.05MG/M3(CR)A2;8990

TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: >1%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 3%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 1 - 10%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:REPORTS HAVE ASSOCIATED REPEATED AND
PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE.
Effects of Overexposure:SKIN/EYE: IRRITATION MAY OCCUR WITH
OVEREXPOSURE. INHALATION: BREATHING
OF VAPORS MAY IRRITATE RESPIRATORY TRACT CAUSING HEADACHE,NAUSEA,
AND DIZZINESS.

First Aid:SKIN: WASH AFFECTED AREAS WITH SOAP & WATER. REMOVE
CONTAMINATED CLOTHING. CONSULT A PHYSICIAN IF IRRITATION
PERSISTS. EYE: FLUSH IMMEDIATELY W/COPIOUS QUANTITIES OF WATER
FOR 15 MINS. CONSULT A PHYSICIAN. INHAL: REMOVE TO FREESHAIR.
RESTORE RESPIRATION IF NECESSARY. TREAT SYMPTOMATICALLY. INGEST:
DRINNK 1-2GLASSES OF WATER TO DILUTE.DONOT INDUCE VOMITING.CONSULT
A PHYSICIAN IMMEDIATELY

Flash Point Method:TCC
Flash Point:80F/26.67C
Upper Limits:1.0-2.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER MIST
Fire Fighting Procedures:SMOTHER FLAMES WITH ONE OF THE EXTINGUISHING
MEDIA. WATER MAY BE USED TO COOL DOWN UNOPENED CONTAINERS IN
VICINITY.
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENTS. DO NOT USE
IN AREAS WHERE SPARKS OR OPEN FLAMES AREPRESENT.

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. CONTAIN SPILL
W/ABSORBENT MATL & PUT INTO VAPOR TIGHT CONTAINERS.PREVENT MATL
FROM CONTACTING ANY WATER SOURCES OR SEWERS LEADING TO SURFACE
WATERS. WEAR APPROPRIATE PROTECTION EQUIP AND APPROVED RESPIRATOR.

Handling and Storage Precautions:STORE IN AREAS DESIGNED TO COMPLY
W/ANSI/NFPA 30 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE.
Other Precautions:GROUND CONTAINERS WHEN POURING LIQUIDS/POWDERS TO
AVOID STATIC CHARGE BUILD UP. PROVIDE ADEQUATE VENTILATION OR
RESPIRATORY PROTECTION TO REMOVE DECOMPOSITION PRODUCTS DURING
WELDING OR FLAME CUTTING COATED SURFACES.

Respiratory Protection:OUTDOOR/OPEN AREAS USE APPROVED RESPIRATOR. IN
RESTRICTED VENTILATION AREAS USE APPROVED RESPIRATOR.
Ventilation:SUFFICIENT VENTILATION IN VOLUME AND PATTERN SHOULD BE PRO-
VIDED TO KEEP AIR CONTAMINANT CONCENT. BELOW CURRENT OSHA.
Protective Gloves:IMPERVIOUS TYPE
Eye Protection:SAFETY GLASSES/TO PROTECT AGAINST SPLASH
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT WITH
CONTAMINATED CLOTHING.
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING OR USING
WASHROOMS.
Supplemental Safety and Health
NK

Boiling Pt:B.P. Text:148-323F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:57.67

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:EXTREME HEAT, SPARKS, OR OPEN FLAMES
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.